Online service
Hotline
15605528186

IOTA 9-5321 Two-component Crosslinkable Polysiloxane Emulsion

     IOTA 9-5321 Two-component Crosslinkable Polysiloxane Emulsion 

    Characteristic

    Crosslinkable polysiloxane emulsion

    Fast curing speed

    Advantage

    Excellent waterproof effect

    Good air permeability

    The slippery effect is obvious and the touch is delicate.

    Safety and convenience in use

    Technical 
    Date

    Indicators

    IOTA9-5321A

    IOTA9-5321B

    Appearance

    Pan-blue liquid

    Milky white liquid

    Viscosity(s, Dropped-4 viscometer,25℃)

    13~17

    12~15

    Specific gravity(25℃)

    0.980~1.00

    0.980~1.050

    pH

    6.0~8.0

    6.0~8.0

    Solid Content(%,120℃,2h)

    34~40

    25~30

    Centrifugal stabilityml, 2500rpm×15min

    ≤0.4

    ≤0.5

    Note: The values listed in this data sheet only describe the typical properties of this product, and do not represent the company's technical standards.

    Application

    It is mainly used for waterproofing of textiles and stones.

    Usage method

    1. Fully mix component A and component B before use to avoid uneven distribution of raw materials due to stratification during storage; 2. Mix component A and component B in proportion of A:B=1:1, and mix them well; 3. Release the mixed material 5-20 times with water, then soak the textiles in it for about 30 minutes, take them out for drying or natural air-drying, and get excellent water-proof effect. If it is used for stone waterproofing treatment, the diluted material will be brushed on the stone surface, and the excellent waterproofing effect can be obtained after drying or natural air drying.

    Recommended dosage

    It is recommended that water be diluted 5-20 times before use. Before use, please carry out tests to determine the reasonable usage and dosage.

    Packaging specification

    This product is packed in 50kg or 200kg plastic drums.

    Storage and transportation

    This product is a non-dangerous product. During storage and transportation, we should pay attention to moisture-proof and prevent impurities such as acid and alkali from mixing in. Under sealed and room temperature conditions, the storage period of component A is two years and that of component B is half a year.

    Material Safety Data

    Please refer to our "Material Safety Data (MSDS)" page.



Telephone:0552-3827158 Mobile:15605528186
Consultation
Products
Application
QQService