Different types of liquid silicone will be cured into solid silicone with different hardness and different properties. Its main uses can be divided into the following categories: 1. Mold silicone ......
2021-11-01Self-repairing materials are a new type of smart materials that have emerged in the past ten years. It can realize the detection of the material's own cracks and spontaneously complete the repair of t......
2021-10-301. The influence of PH on silicone oil The stability of softeners is more sensitive to PH value. In the general dyeing and finishing process, cotton fabrics need to be pre-treated, and alkali or alka......
2021-10-30The suitable working conditions and physical and chemical characteristics of silicone softeners can be summarized as follows: 1. The pH value of the working bath is relatively stable between 5 and 6.......
2021-10-30Softeners can be roughly divided into two categories: fatty acid derivatives and silicones. Fatty acid derivatives are traditionally widely used softeners, and silicones are new varieties that come f......
2021-10-30Silicone, known as the “price increase king” of this year’s chemical products, the DMC quotation hit a high of 64,200 yuan (ton price, the same below) on the first day after the National Day. In the n......
2021-10-30Pills or pellets establish fluidization in the fluidized bed. When the material passes through the spray area, the clothing material mist particles are sprayed on the surface, and after bonding, sprea......
2021-10-29The preparation of a suppository refers to a preparation for the cavity that the medicine and the base are melted, poured into the suppository mold while it is hot, and then cooled and shaped, and the......
2021-10-29advantage: 1) Wide range of applications: Due to the special chemical structure of silicone oil, it is neither compatible with water or substances containing polar groups, nor with hydrocarbons or or......
2021-10-29In the adhesive emulsion polymerization, the emulsifier plays the role of emulsifying, dispersing and solubilizing monomers. The amount of emulsifier is small and the effect is significant, which can......
2021-10-29Silicone defoamers and polyether defoamers are named after the main components they use. The difference between the two includes the difference in composition, the applicable foam......
2021-10-29Linear silicone oil has low surface tension and has unique interface properties. Only a small amount of [0.0001%-0.5% (mass fraction)] low viscosity dimethyl silicone oil is added to coatings and i......
2021-10-28Part of the methyl group in methyl silicone oil is replaced by long chain alkyl group, which is called methyl long chain alkyl silicone oil. The introduction of long chain alkyl group makes the pro......
2021-10-28As the largest producer and consumer of organic silicon, China’s supply of organic silicon monomers and intermediates accounted for 58.57%, of which 3.28 million tons of monomers and 1.64 million t......
2021-10-28Organosilicon materials are a common bulk commodity raw material, which refers to a large class of compounds containing silicon-carbon bonds or silicon-oxygen and silicon-sulfur bonds. Among them a......
2021-10-28