IOTA corporation ltd
Silicone mold structure A. The upper limit of the mold thickness is tentatively set at 250mm, the size can reach 500X500, and the product can be up to 400X400 in the mold area. The mold structure is ......
2021-12-06A. The raw materials of silica gel are generally gel-like, a bit similar to plasticine, colorless, translucent, and tasteless. B. Its main feature is high temperature resistance (maximum 300℃) and ......
2021-12-06A. Limit size: 15~20mm at the thickest part, and 30mm in diameter if it is a sphere. Generally, the recommended size of the thickness is not more than 3MM. When it is more than 3MM, it will take more ......
2021-12-06Standard number and standard name 1. GB/T39256-2020 Green Manufacturing Green Supply Chain Management Information Management Platform Specification for Manufacturing Enterprises 2. GB/T39257-2020 ......
2021-12-06The former refers to silicone oil products before processing, including 4 categories of hydroxy silicone oil, silicone functional silicone oil, carbon functional silicone oil and non-reactive modified......
2021-12-03Sealant is a common adhesive with good effect, but after the sealant is used to bond objects, it must be completely dried before it can be used. Sealant is also called silicone sealant, which is divid......
2021-12-03The silicone market remains stable. The quotations of mainstream manufacturers and mainstream products have not been adjusted, but the actual transaction prices have been lower than the quotations. S......
2021-12-03One of the most important factors in choosing materials for the construction industry is sustainability and environmental friendliness. Environmental protection is the core advantage of inorganic mine......
2021-11-29When referring to the permeability of building materials, it does not mean air, but water in the form of liquids and gases. Air permeability is often used to describe the passage of water vapor, and v......
2021-11-29Inorganic silicate coatings only use natural oxide pigments for toning, which makes the coatings have excellent UV stability and color stability. Inorganic mineral coatings will not fade over time-thi......
2021-11-29The traditional organic coating forms a thin film on the surface, thereby changing the original color effect. Inorganic silicate coatings are made of natural mineral......
2021-11-29First weigh the base material, crosslinking agent and catalyst separately, and then mix them in proportions. Usually the two components should be provided in different colors, so that the mixing of ......
2021-11-26The vulcanization reaction of one-component room temperature vulcanized silicone rubber is initiated by moisture in the air. The commonly used cross-linking agent is methyl ......
2021-11-26Two-component addition molding room temperature vulcanized silicone rubber is divided into elastic silicone gel and silicone rubber. The former has lower strength and the latter has higher strength. T......
2021-11-26Two-component condensation type room temperature vulcanization silicone rubber is the most common type of room temperature vulcanization silicone rubber. The raw rubber is usually a hydroxyl-t......
2021-11-26
