Generally, a product is measured from three dimensions: good performance (priority to core functions), simple construction (operation) and affordable price.
For functional products such as waterproof, the first concern is whether the waterproof performance is superior and whether it can guarantee no leakage.
Constructiveness is based on this. The simpler the construction steps, the more efficient the construction, and sometimes the time saved or even the money can not be exchanged.
Whether the price is affordable or not requires a comprehensive consideration of the total price, quantity and use effect. If the price is too cheap for a while and leads to a greater cost (reloading and damaging other items), it is not worth the loss.
So, what kind of waterproof product does it really combine high efficiency, affordable and convenient?
Xiaobian is here to satisfy your curiosity!
Jialebang's two-component organosilicon waterproof coating has the advantages of high brushing efficiency, time-saving and labor-saving; good product performance, 30-year warranty, and higher comprehensive cost performance ratio; after the base course is coated with interface agent, it can be directly constructed to meet your three key needs for waterproof products at a time!
Wine is not afraid of alley depth, good products are not afraid of test, let's first experience the strength of a two-component organosilicon waterproof coating in advance through a video!
High quality performance of jialebang two component organosilicon waterproof coating on the Qinghai Tibet Plateau
Review on the characteristics of organosilicon waterproof coating in jialebang
1、 Superior waterproof performance, more efficient
1) The product is a two-component organosilicon waterproof coating, the waterproof layer has strong crack resistance and impermeability, and the waterproof effect is good;
2) The whole film forming property is good. After the film is cured, a complete rubber elastomer is formed and attached to the surface of the matrix;
3) It has good elongation and tensile strength;
2、 Simple and less working procedure
1) For the special-shaped part of the base construction waterproof layer without lap joint, more suitable;;
2) It is easy to construct. It can be scraped, painted and brushed. It has good adhesion and permeability to cement mortar, concrete matrix, wood, glass and other building materials;
3) Fast curing speed, 30 minutes surface drying, 4-6 hours initial setting, 24 hours complete curing, easy to next step construction.
3、 Comprehensive cost-effective and more favorable
1) Jiale state silicone waterproof coating has strong anti-aging properties, and the waterproofing effect is 30 years. It saves at least 1 times the maintenance cost, and greatly reduces the direct economic losses caused by the leakage of production equipment and products.
2) The characteristics of repeated application of kellebong silicone waterproof coating make the substrate coated with kellebong silicone waterproof coating easier to maintain and repair in the later stage.
3) In addition, the time saved by the high efficiency of construction is sometimes valuable for money.
Instructions for use of kellebong silicone waterproof coating
? scope of application
This product is suitable for new and old roofs, roofs, basements, bathrooms, swimming pools, warehouses, bridge engineering waterproof, anti-seepage, moisture-proof, air separation and other purposes.
? base treatment
Before use, the surface of the base course shall be cleaned to keep the surface clean and flat. It is forbidden to have unevenness and sanding.
And the surface of cleaned base course shall be roller coated with interface agent once.
? mix components a and B
This product is A two-component waterproof coating. When it is used, component B shall be added into component A according to the mass ratio of (A:B=10:0.9), and it shall be used after being stirred evenly.
After component B is added into component A, the electric mixer shall be used immediately for rapid mixing to avoid coating curing due to not mixing evenly or too slow mixing speed.
Roll, scratch, paint, brush
The mixed coating shall be applied on the surface of the base course, with the total thickness of the coating more than 3mm. Generally, 21.8kg (20kg for material a + 1.8kg for material b) can be painted with 5-6 square meters (the actual amount depends on the actual situation of the base surface and the required thickness of the waterproof layer).
It is suggested that the construction temperature should be 5 ~ 40 ℃. Rolling, scraping, painting, brushing and other methods can be used during construction.
The mixed coating shall be finished within 20-35 minutes.
? precautions
1) Avoid construction in environment temperature lower than 5 ℃ and high temperature environment.
2) Pay attention to the corresponding protective measures during construction.
3) If there is coiled material, compatibility test should be done first.
On this waterproof product
You can see the higher pursuit of both efficiency and quality assurance
Good waterproof, good home
Look forward to the two-component silicone waterproof coating of karebon
Open a good home and a good life for you
Karebon provides
One stop shopping experience of fine home decoration materials
Attention in this issue: new products of karebon are coming into the market, please look forward to!
Past wonderful direct entrance
"BMW presents heroes" and the cause is flying!
Shandong jialebang has become a great power. Take advantage of it!
Jialebang appears in Guangzhou Construction Expo!
? better reading
Tell me if you like