The 12th Suzhou technical exchange meeting on lubricants and additives in 2020 will be held in Suzhou, Jiangsu Province from July 22 to 24, 2020. Shanghai Qike fluorosilicone Material Co., Ltd. has an appointment with you. We are looking forward to communicating and developing with more participating enterprises!
"Company profile
"
Shanghai Qike fluorosilicone Material Co., Ltd. is a high-tech enterprise integrating scientific research, production and sales. The company has a group of high-quality marketing personnel and rich practical experience of operation technicians, mainly committed to the development and application of silicone series, antioxidant, catalyst, flame retardant and other chemical products. The company has advanced production equipment and perfect testing equipment to ensure the stability of products. The company has continuously launched new products at the forefront of the world, which are widely used in oil, petrochemical, plastic, handicrafts, sculpture and copper art, insulation of electronic and electrical components, coating of metals and ceramics, daily chemicals, fur, leather, fiber fabrics and other industries, and have been widely supported and appreciated by the society and the industry.
The company adheres to the corporate spirit of unity, integrity, innovation and realism, adheres to the corporate policy of quality for survival and service for development, and provides customers with the best service and the best products. We welcome and look forward to friends from home and abroad to visit our company and negotiate.
contact information
Manufacturer: Shanghai Qike fluorosilicone Material Co., Ltd
Address: No. 1035, Youting Road, Longquan Village, Tinglin Town, Jinshan District, Shanghai
Tel: 021-34722093
Fax: 021-34722092
Website: www.chicchem.com
Email: salesass@chicchem.com
Product description
Chic L135
Quality index:
project
index
Appearance
Colorless or light yellow transparent liquid
Purity,%
More than 98
Water content,%
Less than 0.1
Solubility,%
Mineral oil & gt; 5% esters & gt; 5% water & lt; 0.01%
density
20℃0.95-1.0g/cm3
flash point
152℃,PM
Kinematic viscosity
20℃ 100-130mm2/s
Performance advantages:
1. It is an economic and effective product to replace solid methylene bisphenol, with very low volatility at high temperature
2. Adding a small amount of compressor oil will greatly improve its thermal oxidation stability
3. In gasoline and diesel engine oil, it will greatly improve the piston cleanliness and effectively control the formation of oil sludge.
4. Be able to control the hydrolytic stability and weight loss of copper in beverage bottle test.
5. Very low water extractability.
6. Easy to handle liquid without diluent, easy to mix with other products.
7. Excellent solubility in mineral oil and synthetic base oil, not easy to crystallize even at low temperature.
8. It has significant synergistic effect with chic L57 in various base oils
Product application: This product is a liquid high molecular weight phenol type antioxidant, which is used in various mineral or synthetic lubricants with special high temperature requirements for ashless antioxidant. It is widely used in all kinds of lubricants, whether automotive lubricants or various industrial lubricants, such as engine oil, gas turbine oil, gear oil, air compressor oil, heat transfer oil, hydraulic oil, aviation lubricating oil, etc.
Recommended dosage:
Engine oil
0.15-0.8%
Industrial gear oil, air compressor oil
0.2-0.5%
Industrial lubricants
0.1-0.5%
Gas / turbine oil
0.1-0.25%
Circulating oil
0.1-0.3%
Heat transfer oil
0.15-0.5%
Chic L57
Quality index:
Appearance
Light or dark amber transparent slightly viscous liquid
viscosity
40℃ 300-600mm2/sec
Melting range
0-5 C
Water content
≦0.15%
Total base number
152-172mgKOH/g
Two aniline content
≦0.1%
flash point
>185℃,COC
Solubility
Mineral oil > 5%, esters > 5%, water & lt; 0.01%
Product Description: Chic L57 high temperature antioxidant is a liquid octyl / butyl diphenylamine antioxidant used for lubricating grease and oil
Performance advantages:
1. Approved by 21 CFR 178.3 570 under FDA / USA, FDA / USA can be used to prepare usdah-1 lubricating grease accidentally in contact with food, with the maximum limit of handling capacity & lt; 0.5%
2. It can bring high TBN (TBN = 180) and high active nitrogen content
3. Effectively control the viscosity increase caused by oxidation and prolong the service life of oil products
4. Good sealing material compatibility, without diluent
5. It has significant synergistic effect with antioxidant chic L35 in various base oils
Application: good oil solubility, good compatibility with other types of functional additives, especially with phenol ester antioxidant. At a higher temperature, it still has a good anti oxygen effect. It can be widely used in all kinds of heat transfer oil, high quality internal combustion engine oil, turbine oil, hydraulic oil, air wheel oil, and various lubricating grease and fuel oil.
Storage and transportation: it should be stored in dark, dry, low temperature and sealed conditions
Recommended dosage:
Mineral oil based industrial lubricating oil: 0.1-0.5%
Synthetic industrial lubricants and greases: 0.3-1%
Engine oil: 0.3-1%
High quality internal combustion engine oil: 0.3-1%
Click the picture below to enter the applet and register for the lubricating oil meeting
Or select QR code
Long press and sweep to participate in the meeting
Suzhou, Jiangsu
July 22-24, 2020
The 12th Suzhou technology exchange meeting on lubricants and additives in 2020
One
Sponsor: Beijing Guolian video information technology Co., Ltd
Guolian Co., Ltd. (Stock Code: 603613. SH)
Two
Network of petroleum additives (www.sytjj. Ibicn. Com)
Three
Co sponsor Jiangsu TOM group - Jiangsu Thomson Intelligent Equipment Co., Ltd. (www.cn-toms. Com)
Xinxiang Ruifeng New Material Co., Ltd. (www.sinoruifeng. Com)
Qingdao suofurun Chemical Technology Co., Ltd. (www.suofurun. Com)
Four
Support unit: Jinan Jiajin New Material Co., Ltd
Jiangsu Zhongli Automation Technology Co., Ltd
Zibo Huihua Petroleum Additive Co., Ltd
Shandong Ruixing Flame Retardant Technology Co., Ltd
Qingdao Delian Petrochemical Co., Ltd
Suzhou Sanli special additives Co., Ltd
Zibo Nari Instrument Co., Ltd
Tecodo additives (Shenzhen) Co., Ltd
Dalian Jinlong petrochemical plant
Shandong zhuyou Lubrication Technology Co., Ltd
Nanjing shunhengxin Chemical Co., Ltd
The first day, July 22, Wednesday, all day report, the second day, July 23, Thursday, all day report, exhibitor presentation
The third day, July 24, Friday, 8:00-17:00 business inspection
Venue: Jiangsu · Suzhou? Meeting topic ★ requirements of national 6 emission standard on engine oil formula
★ application of environmental friendly synthetic ester in metalworking fluid
★ engine coolant technology in the new millennium
★ driving test of compound additives for engine oil in China
★ application of new viscosity index improver in low viscosity engine oil
★ new requirements of new environmental protection regulations for marine engine oil
★ anti hydraulic oil formulation technology of energy saving ring
★ introduction to simulation test method of engine oil
★ application of new ashless dispersant
★ introduction of water-based antirust fluid technology
★ application of new synthetic ester in synthetic refrigeration oil and synthetic air compressor oil
★ application of organic molybdenum nitride fullerene in lubricating oil
★ selection and application of compound additive formula
★ composition change of engine oil
★ application of naphthenic base oil
★ formulation development of new specifications of vehicle gear oil
★ development of water-based fire-resistant hydraulic oil
? participants: professionals from enterprises such as lubricating oil, base oil, additives, petroleum analysis instruments, metal processing fluid and relevant scientific research institutes.
? the conference fee is 3500 yuan / person, including technical exchange fee, information fee, inspection fee, meal fee, etc. the accommodation is arranged in a unified way, and the expenses shall be borne by oneself.
May 24-26, 2018 10th lubricating oil and additives conference group photo location: Zhengzhou
May 24-26, 2017 9th lubricating oil and additives conference group photo location: Wuxi
May 25-27, 2016 8th lubricating oil and additives conference photo location: Tongxiang
Contact information of conference affairs group
Tong Yan: 1381083577
Fan Nana: 13621130938
Li Feng: 15117960210
E-mail：bj63701308@126.com
Address: Guolian joint stock building, building 3, zone 6, headquarters base, No. 188, South 4th Ring West Road, Fengtai District, Beijing
contact information
Tel: 010-63701308
Email: bj63701308@126.com
The official account is published for the purpose of internal communication, and the source and source of the article are indicated at the end of the article. This platform is dedicated to sharing and communicating in the industry. The article does not represent the platform view, and the copyright belongs to the original author. If the copyright is involved, or the copyright owner is unwilling to publish on this platform, please contact the copyright owner with the editor, and the editor will be deleted immediately. Welcome to share.